Fix Lexmark Printer Not Printing from Tray 2

Printing using the Lexmark printer is often considered suitable as Lexmark printers bring in multi-dimensional printing functionality with a stellar performance. However, continued usage of your Lexmark printer may pave the way for printing glitches in the form of the “Lexmark printer not printing from Tray 2” issue. So, here is a quick guide that attempts to bring in a host of effective solutions to help you take care of this “Lexmark printer not printing from Tray 2” problem. 

1 - Making Sure that Papers are Placed Correctly in the Paper Tray

One pretty significant cause of the “Lexmark printer not printing from tray 2” issue is the inadequate positioning of papers inside tray 2. To check this up just open the paper tray, make sure that the entire paper lot is kept in proper alignment, and then endeavor to secure a printout.

2 - Aligning Paper Tray Manually Should also be Tried 

Even when the paper tray is in incorrect alignment, the issue in the form of “Lexmark printer not printing from tray 2” may arise. For this, simply open the paper tray and insert it back into the relevant slot cautiously which can prove to be sufficient enough as regards fixing this “Paper Tray 2” issue.

3 - Making Adjustments to Paper Settings May Also Work

Incompatible printer settings may interfere with the printer’s functioning and may seriously pave the way for the “no printing from tray 2” issue. In this given situation you must make a few adjustments to the printer settings in the following way.

1 - Ensure that Paper Tray 2 is selected as the default tray to fetch papers to the printing head.

2 - Several other parameters like paper size, paper type, etc must also be configured appropriately.

3 - Finally, save changes and initiate securing a printout to judge whether the printing problem has been taken care of.

4 - A Driver Update Can also Be Effectuated

The attempt to fix the Lexmark paper tray problem also requires taking a look at the pending driver updates as Lexmark printer drivers remaining outdated for a long can certainly cause the “Lexmark Paper Tray 2” issue at some point in time.

Step 1 - Begin by opening the official webpage of the Lexmark followed by navigating to the Drivers and Software section.

Step 2 - Now as per your Lexmark model and the operating system that you are using download a copy of the latest printer driver.

Step 3 - Just click on the executable file and continue following the on-screen instructions to get the latest Lexmark printer firmware on stream.

5 - Cleaning printer Rollers Happens to be the Next in line

Step 1 - Switch off your Lexmark printer and open the Tray 2.

Step 2 - Now start a manual rotation of rollers to clean the dust and paper particles.

Step 3 - While rotating the rollers you should not be putting excessive pressure on them other there may be a serious impediment to the rollers.

Step 4 - Insert back the Paper Tray 2 safely and try to extract a printout.

6 - Reset your Lexmark Printer and Get the "Paper Tray 2" Problem Aligned

Step 1 - Open the Utility of your Lexmark printer followed by clicking on the Maintenance tab.

Step 2 - Continue clicking the “Reset” option in the Reset section and give your confirmation to the Reset process by giving a click on the “OK” button subsequently.